View UPG2027TQ_1145782.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
NEC's L-BAND 4W HIGH POWER SPDT SWITCH IC
FEATURES
* LOW INSERTION LOSS: 0.40 dB TYP. @ 1.0 GHz 0.50 dB TYP. @ 2.0 GHz * HIGH LINEARITY: 2f0, 3f0 = 70 dBc TYP. @ 1.0 GHz, Pin = +35 dBm 2f0, 3f0 = 70 dBc TYP. @ 2.0 GHz, Pin = +33 dBm * * HIGH-DENSITY SURFACE MOUNTING: 10-pin plastic TSON package (2.30 x 2.55 x 0.60 mm) Pb FREE
UPG2027TQ
NEC's UPG2027TQ is a high power SPDT GaAs Switch IC for digital cellular and cordless telephone applications. This device can operate from 500 MHz to above 2.0 GHz, with low insertion loss and high linearity.
DESCRIPTION
APPLICATIONS
* GSM Triple / Quad Band Cellular * Cordless Phones * Short Range Wireless
ORDERING INFORMATION
PART NUMBER UPG2027TQ-E1-A PACKAGE 10-pin plastic TSON MARKING 2027 SUPPLYING FORM * Embossed tape 8 mm wide * Pins 5, 6 face the perforation side of the tape * Qty 3 kpcs/reel
Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: UPG2027TQ-A
California Eastern Laboratories
UPG2027TQ PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM
(Top View)
10 9 8 7 6
(Bottom View)
6 7 8 9 10
PIN NO. 1 2 3
PIN NAME Vcont2 NC (GND) Common NC (GND) Vcont1 RF1 NC (GND) NC (GND) NC (GND) RF2
2027
1 2 3 4 5 5
NC
4 3 2 1
4 5 6 7 8 9 10
ABSOLUTE MAXIMUM RATINGS (TA =+25C, unless otherwise specified)
PARAMETER Control Voltage Input Power Operating Ambient Temperature Storage Temperature SYMBOL Vcont Pin TA Tstg RATINGS +8.0 +38 -45 to +85 -55 to +150 UNIT V dBm C C
RECOMMENDED OPERATING RANGE (TA =+25C)
PARAMETER Control Voltage (High) Control Voltage (Low) SYMBOL Vcont (H) Vcont (L) MIN. +2.5 0 TYP. +2.7 0 MAX. +5.0 +0.2 UNIT V V
UPG2027TQ
ELECTRICAL CHARACTERISTICS (TA = +25C, Vcont = +2.5 V/0 V, ZO = 50 , DC blocking capacitors value: 56 pF,
Each port, unless otherwise specified)
PARAMETER Insertion Loss Isolation 2nd Harmonics 3rd Harmonics Switching Speed Control Current SYMBOL LINS ISL 2f0 3f0 tsw Icont No RF TEST CONDITIONS f = 0.5 to 1.0 GHz f = 1.0 to 2.0 GHz f = 0.5 to 1.0 GHz f = 1.0 to 2.0 GHz f = 1.0 GHz, Pin = +35 dBm f = 2.0 GHz, Pin = +33 dBm f = 1.0 GHz, Pin = +35 dBm f = 2.0 GHz, Pin = +33 dBm MIN. - - 23 17 65 65 65 65 - - TYP. 0.40 0.50 25 18.5 70 70 70 70 1 - MAX. 0.65 0.75 - - - - - - 5 50 UNIT dB dB dB dB dBc dBc dBc dBc s A
UPG2027TQ EVALUATION CIRCUIT
Off chip DC blocking capacitors value C1 = 56 pF, C2 = 1 000 pF (Bypass), using NEC standard evaluation board.
Vcont2
C1 C2 C1
RF2
2027
Common
Vcont1
C1
C2
RF1
The application circuits and their parameters are for reference only and are not intended for use in actual design-ins.
TRUTH TABLE
Vcont2 NC (GND) Common NC (GND) Vcont1
RF2 NC (GND) NC (GND) NC (GND) RF1
VCONT1 High Low
VCONT2 Low High
COMMON-RF1 ON OFF
COMMON-RF2 OFF ON
UPG2027TQ PACKAGE DIMENSIONS 10-PIN PLASTIC TSON (UNIT:mm)
0.400.05 0.180.05 (0.05) (0.30) (0.30) (1.95) (1.70)
(Bottom View)
(0.15)
2.550.15
2.250.1
2.200.1 2.300.15 (0.125) (0.60 MAX.)
(0.95)
UPG2027TQ RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office.
Soldering Method Infrared Reflow Soldering Conditions Peak temperature (package surface temperature) Time at peak temperature Time at temperature of 220C or higher Preheating time at 120 to 180C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) Peak temperature (package surface temperature) Time at temperature of 200C or higher Preheating time at 120 to 150C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) Peak temperature (molten solder temperature) Time at peak temperature Preheating temperature (package surface temperature) Maximum number of flow processes Maximum chlorine content of rosin flux (% mass) Peak temperature (pin temperature) Soldering time (per side of device) Maximum chlorine content of rosin flux (% mass) : 260C or below : 10 seconds or less : 60 seconds or less : 12030 seconds : 3 times : 0.2%(Wt.) or below : 215C or below : 25 to 40 seconds : 30 to 60 seconds : 3 times : 0.2%(Wt.) or below : 260C or below : 10 seconds or less : 120C or below : 1 time : 0.2%(Wt.) or below : 350C or below : 3 seconds or less : 0.2%(Wt.) or below Condition Symbol IR260
VPS
VP215
Wave Soldering
WS260
Partial Heating
HS350
Caution
Do not use different soldering methods together (except for partial heating).
Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale.
11/12/2004
A Business Partner of NEC Compound Semiconductor Devices, Ltd.
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279
Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information.
Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*)
If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.

▲Up To Search▲

Price & Availability of UPG2027TQ

	To Download UPG2027TQ Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .